Any modified device that makes the control of electrical appliances more comfortable is quickly becoming popular. This is especially true of the domestic sphere. The appeared regulators are not yet so demanded as ordinary switches, but have already confidently occupied their niche.
Consider how to connect a dimmer yourself, while respecting the rules and not making mistakes.
Types of dimmers and design features
A dimmer or, in other words, a dimmer allows you to set various lighting modes from one point. Unlike the two-key switch, which can carry out up to 3 intensity positions, this device smoothly changes the brightness of one or more light sources from the weakest to the maximum.
To install it correctly, you need to understand the design. But here a difficulty arises regarding various species. On sale there are devices with different control methods.
The most famous is the rotary mechanism, but in addition to it you can stumble on a button, electronic, remote and even acoustic.
The main active element of the rotary model is the handle, which must be turned clockwise / counterclockwise to reduce or increase the power of lighting
Like a switch, a light regulator of the simplest design connects to a two-wire wire to break the power circuit.
The shape of the case, it resembles a standard electrical installation - a socket or switch - so it can be mounted both in a socket and just in a free wall niche. Fixing occurs due to the elastic metal foot-spacers or two feet, and the contacts are also standard.
The first contact is for the incoming phase coming from the distribution box, the second is for the outgoing load core, which is sent to the light source. As lighting devices, a table lamp, a floor lamp, a chandelier, a sconce or a group of spotlights can act.
Manufacturers supply devices with detailed wiring diagrams that must be followed. They are printed on paper and directly on a plastic case.
The button control is reminiscent of a conventional switch: by briefly pressing the keys you can turn on / off the lamp. However, if you hold the key for 1-2 seconds, the light intensity will change smoothly.
Modern electronic models can control simultaneously several fixtures (from 2 to 5) installed in different rooms. Remote devices are equipped with a remote control. But you need to remember - the wider the functionality of the dimmer, the higher its cost.
If we talk about differences in installation, the installation and connection of electronic devices is almost the same, with the exception of the nuances characteristic of individual manufacturers.
Analysis of wiring diagrams
The choice of circuit depends on many factors, including the dimmer model, the connection method - either individually or with switches, the number of dimmers or lighting devices.
Also, a very important point should be taken into account: different devices are used for incandescent lamps, LED lamps and tapes, low-voltage halogen light sources.
Testing a dimmer with a remote control connected to an LED strip. LED tapes have been used successfully to illuminate suspended two-, three-tier drywall structures
The most basic dimmer connection scheme can be easily confused with the circuit breaker mounting scheme, since it really repeats it one by one.
Wiring is usually done with a two- or three-wire cable, depending on the grounding system. In new homes, it is recommended to use a wire with three cores - VVGng with a cross section of 1.5 mm².
Three wires are pulled from the machine in the electrical panel: ground - to the metal casing of a chandelier or lamp, zero - to the lamps, and phase - to the dimmer, to the input terminal
But often a chandelier has many horns, and a dimmer serves to control a group of separately located fixtures.
In this case, it is advisable to install two instead of one device so that you can control the lighting level of two separate groups.
The fundamental difference is in the number of load wires. One common phase is supplied to the regulator, and two phase wires directed to different groups of luminaires are output. Accordingly, zero is also divided into two
How does the connection occur if, instead of the control settings for conventional or energy-saving lamps, it is necessary to adjust the LEDs?
Usually complete with ribbons or lights, along with a dimmer, there is an adapter from 220 V to 12 V. This can be a power supply that is inserted into a wall outlet.
Both wires from the converter are pulled to the dimmer, connected according to the diagram to the necessary connectors, and from the output terminals are fed to one lighting device or several fixtures connected in parallel
Paired with a light regulator, one or more pass-through switches are often used - the power supply network with such a kit becomes more perfect from the point of view of ease of use.
The position of the switch is determined in different ways: it can stand between the shield and the dimmer or between the dimmer and the lamp.
The layout of the loop-through devices differs from the standard device, and this must be taken into account when connecting. The main attention is paid to the connection of phase conductors in both devices
Finally, we consider the arrangement of wires and terminals with a standard dimmer connection - nevertheless, it is the most popular in everyday life.
The simplest circuit that can serve as a standard for connecting a standard controller. The phase core is fed to the input, and from the output of the adjacent terminal goes to the lamp
The listed examples are only a small part of various schemes for mounting the device. To make an error-free connection, it is necessary to use the manufacturer's instructions as the main guide.
Step-by-step replacement instructions
To purchase a new dimmer, they first find out what type of lamps it will service. Then, based on the allocated budget, they buy either an inexpensive Chinese model or the design of a trusted manufacturer - Makel, Schneider, Legrand.
If you need to install a new, just purchased device, perform the same actions as when installing the switch:
- change wiring or make sure old cables are suitable;
- if there is no separate machine in the switchboard, install it;
- prepare a place for installation;
- perform installation.
But more often it is necessary to make a replacement, that is, dismantle the switch housing and install a dimmer in its place. Consider this option.
Step 1 - turn off the lighting circuit
Any manipulations with electrical devices in the apartment should begin with a forced blackout on the shield, which is located either on the common ground or inside the apartment, in the corridor (hallway).
This is provided by safety standards and ensures that all connected devices and cables are kept in good condition. But the main goal is to protect one’s own health.
To disconnect the load yourself, just switch the lever of the machine. If you need to replace the circuit breaker or other electrical work on the panel, you should call an electrician servicing the house
For additional insurance, either a tester or indicator screwdriver to determine the voltage should always be at hand.
Checking the power line is the first action that should be performed at the beginning of installation or removal of the electrical installation, when connecting the wires. It is recommended that you use a tool with insulated handles and gloves coated with a thin layer of dielectric polymer.
Step 2 - dismantling a conventional switch
To remove the old device, you need to prepare a screwdriver. The process of dismantling takes only a few minutes and consists in sequentially removing first the decorative external part, and then the internal mechanism connected to the wires.
Image Gallery
Photo from
Stage 1 - determination of the dismantling method
Stage 2 - removing control tools - keys
Stage 3 - dismantling the decorative frame
Stage 4 - loosening the mechanical part
The last crucial moment is disconnecting the wires. The cores are carefully removed from the terminals, slightly loosening the holding screws or clamps.
The stripped ends must be kept intact so as not to cut the wires anew and not reduce their already limited length.
Step 3 - installing the control device
If the wires are in good condition, then nothing needs to be done to prepare. You should start by studying the instructions, which list the installation requirements, the main technical characteristics of the device, and most importantly - there is a wiring diagram.
The dimmer is disassembled, familiarized with the design and in parts mounted in place of the switch.
Image Gallery
Photo from
To unscrew the locknut, which can be found right in the center, under the handle, use thin-nose pliers or nippers with a narrow grip
Removing the nut allows you to take off the decorative parts - the external plastic panel and frame. The nut is kept in order not to get lost
The inner part, which is inserted into the mounting box, consists of two important elements - the housing and the operating mechanism. They are shared
Interesting elements of the mechanism are the terminals that are on the back side. On the front side is a working control device
On the reverse side, you can find a connection diagram that indicates which terminal is input and which is output
Insulated ends of the cores are inserted into the desired terminals and tighten them. Then the mechanism is returned to the case, which is placed in the mounting box
The casing is fastened with two small self-tapping screws, which are inserted laterally into the mounting holes intended for them.
The finishing stage includes putting on and snapping a plastic frame and panel, and lastly, a rotary handle
Stage 1 - loosening the fastening element - locknuts
Stage 2 - disassembling the dimmer into separate parts
Stage 3 - disassembling the inside of the dimmer
Stage 4 - learning the elements to connect
Stage 5 - reconciliation with the wiring diagram
Stage 6 - connecting the cores to the contacts
Stage 7 - fixing the case to the wall
Stage 8 - final assembly of the dimmer
After installation, a diagnosis should be made. To do this, connect the power, turn on the dimmer and try to change the light intensity by rotating the knob.
If all the work is done correctly, the brightness of the illumination gradually increases and also smoothly decreases.
Tips for choosing and using
Often, a dimmer is purchased in order to significantly reduce the cost of electricity. It should be understood that great savings cannot be achieved, but it will still be possible to reduce costs by 15-17%.
When choosing a model, pay attention to design. Manufacturers offer various collections that differ not only in technical characteristics, but also in their external design - color, shape, size of the decorative panel
Remember that the mechanisms of regulators are sensitive to any excess temperature in the apartment, usually it is limited to +27 to -28 ° C.
For the normal functioning of the device, a minimum load of 40 W is required, otherwise the working mechanism will quickly fail.
If you try to connect the dimmer to lighting devices not listed in the manual, it will not work. The power of the device must necessarily correspond to the total power of the lamps.
Informative and useful videos shot by professional electricians and home craftsmen will help to understand simple designs and get acquainted with complex dimmers closer.
Acquaintance with the purchase made on the Internet. Device Diagnostics:
Connection of the universal built-in dimmer to the switch:
In what sequence is the installation made:
All the steps for installing a dimmer, from purchase to diagnostics, can be done independently. The main points that should be given special attention are the choice of the correct connection scheme and the device's compliance with the lighting fixtures according to their characteristics.
Do you have practical skills for installing a dimmer and can you share advice with visitors to our site? Or maybe there are questions about the topic of the article? Please share your experience, ask questions in the block under the article.