Self-priming pumps are a special type of surface equipment designed to increase the working life. Their moving parts are always cooled, the seals are not damaged, the motor works flawlessly. However, due to the solid assortment, it is difficult to dwell on a suitable model. Do you agree?
Everything you need to know about self-priming water pumps can be found on our website. We detail the principle of the design and operation of units of this type, the differences in design are given. The information we provide will help you make a balanced purchase.
We have described in detail the different options for self-priming pumps, provided recommendations for use. Useful photos and video applications will help to deepen your knowledge.
Features of self-priming units
When purchasing a unit for use in a suburban area, you should analyze a number of factors that determine the desired category.
These include:
- source depth;
- distance from the source to the house;
- head level;
- quality of water supplied;
- water consumption.
Typically, these data are taken into account when calculating the performance of the device, but they are also useful when choosing a pump by the type of suction.
Distinguish between self-priming and normally suction devices. The difference lies in the design that regulates the reloading process in case air enters the system.
A sample of a self-priming pump - Pedrollo PLURIJET, is designed to move and lift clean water from sources from a depth not exceeding 9 m, nominal pressure up to 120 m, flow - 200 l / min (12 m3 / hour)
Normally suction pumps include submersible and semi-submersible pumps, the functioning of which occurs if the fluid from the source moves to the working compartment by gravity. When air enters, automatic protection against “dry running” is triggered and operation stops, since the device cannot work idle. The pump has to be restarted.
The scheme of operation of the self-priming pump: 1 - pouring water; 2 - separation of water and air in the working chamber; 3 - completion of the circulation, the beginning of the pump; 4 - fluid retention when the pump is turned off (+)
Self-priming models are designed for self-removal of air without human intervention. This is due to design features: in the upper part of the working compartment there is a plunger through which air is removed. The check valve prevents it from getting back.
Modern versions with integrated valves produce self-refilling, which eliminates the need for constant monitoring of equipment.
Image Gallery
Photo from
Using self-priming pumps
Design feature of the equipment
Sizes of the soaking-up and giving branch pipes
Features of the self-priming pump
A small lifting height of self-priming units is also associated with the reloading process - up to 9 m. It is important to ensure that the working chamber is constantly filled with water, and the shorter the supply line, the faster the process of moving water.
Most often, self-priming pumps are part of a pumping station with a hydraulic accumulator, a suction pipe (or ejector), shut-off valves, and instrumentation.
Proper installation of the suction line
When installing a water supply system, it is important not only to install a self-priming pump or pump station, but also to install a suction line.
The pressure value (7-8 m) is calculated taking into account the height of the water and the parameters of the hydraulic resistance that occurs during the movement of the liquid
When creating a sealed water supply, the ratio of the diameter of the pipeline to the diameter of the pipe should be checked, and the length of the entire trunk should be shortened (if possible).
The longer the suction line, the higher the resistance, respectively, the lower the pressure. The presence of leaks can lead to equipment failure - this condition is relevant for centrifugal models that are not designed for pumping air-liquid media.
Pay attention to the location of the pipes. The suction line must not have kinks, kinks, or a complex prefabricated structure rising above the level of the pump; otherwise, air jams may occur that interfere with the suction process and are difficult to remove from the system.
Try to position the suction line so that it is the simplest configuration with straight pipes and one corner, that is, it would resemble the letter “G”
As additional equipment installed directly on the highway, use a check valve (or a simple non-return analogue) and a filter. Thanks to the valve, water is held in the pipeline and does not flow back, thereby protecting the pump owner from refilling.
The filter protects the equipment from the ingress of bottom sediment with large inclusions, pieces of aquatic plants, clay impurities.
Is it possible to replace the self-priming model with a conventional pump? If there is no other way out, then they do so - during the repair or purchase of new equipment.
However, do not forget about some of the nuances:
- it is necessary to completely fill the pump chamber and the line before switching on;
- air must be avoided, otherwise the equipment will fail;
- pouring should be done after each “accident” caused by depressurization of the water supply.
Practice shows that users of self-priming pumps are not in a hurry to switch to conventional pumps, especially since the choice of equipment is often dictated by the optimal suction conditions.
Centrifugal Self-priming Pumps
A suitable option for autonomous use in a private suburban area is a centrifugal self-priming pump, which pumps not only clean water, but also media with small inclusions - for example, sediment from a pond.
It copes with a liquid that is a mixture of water and gas. The equipment is surface, that is, it is installed above the water mirror, and the process of raising water is provided by internal vacuum in the suction line.
Image Gallery
Photo from
Self-priming pump control
Design Benefits
Vibration protection
Pouring water into the system before the first start
Drain the pump before preservation
Model with two discharge nozzles
Key Use Cases
Operation within the pumping station
Types of structures and their features
It is necessary to familiarize yourself with the device of a self-priming centrifugal pump for the possibility of troubleshooting and regular maintenance. The unit is a simple mechanism, enclosed in a strong spiral-shaped case with a cover, the case material is stainless steel, cast iron, plastic.
Inside is an impeller (steel or polymer), equipped with blades deployed in the opposite direction. In addition to the impeller, the important parts are the diffuser and the ejector (Venturi tube).
Thus, almost all parts are static, and the movement defines a single dynamic element - the disk (s) of the impeller.
The design of the pump means easy access to the main part for routine inspection or minor repairs (such as cleaning or turning). Since the device is located outside, unlike a submersible analogue, there is always the opportunity to inspect it and replace parts.
The layout of the centrifugal pump: 1 - metal or plastic housing; 2 - cover; 3 - built-in ejectors; 4 - impeller; 5 - mounting shaft; 6 - consolidation; 7 - bearings; 8 - capacitor; 9 - electric motor
Centrifugal models are more massive than vortex ones, but they work much quieter and are capable of pumping dirty water with inclusions of the middle fraction. For heavily polluted environments, special drainage pumps are designed, and if additional grinding is necessary, fecal pumps.
When choosing a unit from a supplier, take an interest in the possible equipment: in addition to the electric engine, gasoline or diesel are used, however, for summer cottages, electrical equipment is more optimal. With regular preventive examinations and maintenance, the centrifugal pump can last up to 20 years.
The characteristics of the models vary, but the average performance may look like this:
- temperature inside the system - up to + 35ºС;
- air temperature outside (at the pump installation site) - up to + 35ºС;
- lifting height of the suction line - up to 8 m;
- the highest pressure in the system is 6 bar;
- motor - bipolar asynchronous (protection class not lower than IP 44).
Most of the parts are made of stainless steel, graphite or ceramic is used as the material of the mechanical seal.
KSB Multi Eco multi-stage self-priming centrifugal pump for domestic water supply, rainwater recovery; allows sand inclusion (concentration - up to 50 g / m³)
Thus, the self-priming unit in structure is very similar to a conventional centrifugal pump, with one difference: the process of liquid recirculation occurs inside the housing, and not in the remote line.
Fill and drain plugs, stand for mounting to the engine, the location of the nozzles connecting the apparatus with the pressure and suction piping - as in simple equipment.
Features and principle of operation
Water flows through the nozzle from the suction pipe into the housing and fills the entire space, after which the impeller is automatically actuated. Under the influence of centrifugal force, the liquid is displaced from the center to the peripheral sections and moves under pressure to the pressure line, also connected by means of a pipe.
Installation diagram of a centrifugal self-priming pump located on the surface above the water mirror in the well. The non-return valve acts as an obstacle to the opposite draft of the movement of water
With a decrease in pressure in the central part, water is again sucked into the housing from the suction pipe. The frequency of suction-ejection is the basis of continuous water supply by centrifugal equipment.
The number of impellers in the pumps can be different, from one to several (single-stage and multi-stage), however, the principle of pumping fluid into the casing and further along the line does not change.
Scope of centrifugal units
Self-priming centrifugal devices are capable of pumping liquids that vortex-type models cannot cope with:
- viscous media;
- solids liquids;
- abrasive fluids.
In this regard, this category of pumping equipment is often used in production, for example, for pumping oil products. In private use, the unit will not stagnate if the owners use a country pond or other body of water for watering a garden or kitchen garden, whose water does not differ in purity and transparency.
The device is capable of moving fluid with thick sediment, pieces of mud and other aquatic plants.
Household pumps do an excellent job of pumping clean water, so they are also good for building an autonomous water supply for the building and adjacent buildings (baths, summer kitchens). A powerful performance pump is suitable for equipping a rational irrigation system not only in beds, but also in lawns, greenhouses, flower gardens and gardens.
When starting up, the self-priming of the water supply system takes place, which saves money on maintenance and guarantees stability.
Image Gallery
Photo from
Self-priming plant care pumps
Pumping water from an open reservoir
Pumping water from a storage tank
Use to increase system pressure
Vortex impeller pumps
Among the self-priming modifications there is a group of vortex pumps, however, unlike centrifugal counterparts, they are not suitable for pumping viscous media.
The presence of solid inclusions in water must be excluded, otherwise the performance of the equipment will be violated. Vortex type pumps are simple to set up and maintain, but have lower performance and low efficiency.
Self-priming vortex pump Pedrollo PKm 60 for exceptionally clean water: power - 0.37 kW, productivity - 0.3-2.4 m³ / h, water lift height - up to 5 m
The scheme of the device and the principle of operation
The internal parts of the vortex pump differ little from the analogues of centrifugal equipment. The main dynamic part is the working disk wheel, equipped with blades arranged in a circle.
The blades rotate inside a kind of channel associated with the inlet and outlet pipes. The fluid flows through the suction pipe, under the influence of the rotation of the wheel, it spins and moves along the helical path towards the outlet.
The multiple presence of liquid in the space between the blades forms additional energy and pressure, raising water to the required level, this is the basis for the principle of operation of a self-priming vortex pump.
The intake air is mixed with the liquid, then the mixture is again divided into two components: the air is discharged outward, and the liquid continues to circulate in the working chamber. After all the air has been removed, the chamber is completely filled with water and put into operation on the principle of centrifugal equipment.
Optima vortex pump (Poland) in a cast-iron case, with a capacity of 0.37 kW and a pressure of 35 meters. Designed for water supply at home or garden, pumping only clean water
A mandatory element, like centrifugal equipment, is a check valve that performs two functions:
- prevents air backflow;
- provides filling of a working chamber with water.
The maximum height of water rise, which is provided by the vortex self-priming equipment, is 8 meters. Vortex pumps differ from centrifugal pumps in two fundamental qualities: they do not pump dirty media, but they do an excellent job with moving a mixture of air and liquid.
Low efficiency (from 25% to 45%) is explained by the fact that a lot of energy is spent on the process of pumping liquid. For this reason, the owners of suburban areas prefer centrifugal units. Vortex equipment is usually remembered when it is not possible to establish a more productive analogue.
Home Benefits
The advantage of this category of self-priming pumps is their compact size and increased head (5-7 times more than that of centrifugal devices). Thus, it is rational to use them when servicing a source of water located at a far distance from the points of tapping, provided that large capacity is not needed.
Speroni KPM vortex pumps are available in two versions, differing in size, weight, volume of the working chamber and capacity.Modifications are used to fill small-volume membrane tanks and heating systems (+)
An example is the pumping of water from a well, the rise in which does not exceed 7-8 m, into the so-called "working zone", where garden plantings, beds, and greenhouses are usually located. Given the unevenness of the terrain and the bending around of summer cottages, it is worth counting on a pipeline up to 100m long, which means that a large pressure is required.
In addition to the use of vortex modifications in autonomous private water supply systems, they are used to extinguish fires, ventilation devices, and in thermal installations.
Ejector - a device for deep sources
Self-priming pumps with a built-in ejector are designed for open natural bodies of water, wells and wells, the depth of water intake in which does not exceed 7 m or 8 m.
Typically, the technical characteristics of this category of equipment are reduced to the following parameters:
- productivity - 4-5 m³ / h;
- pressure - 4-6 bar;
- head - 50-60 m.
Together with a hydraulic accumulator, a pressure switch and a set of automation, such modifications form efficient pumping stations. At some distance from the building, where the main points of water intake are located, there are few surface self-priming equipment, an additional mechanism is required.
Installation diagram for pumps equipped with a remote ejector for wells up to 40-45 m deep with a pipe diameter of 2 and 4 inches (+)
It is possible to increase the suction power by using a remote ejector, which can cope with the rise of water located at a depth of 35-40 m. Industrial models of ejectors are able to work effectively if the water mirror is at a depth of 19-20 m. The long distance to the source is also not an obstacle for ejector device.
When using a remote ejector, the efficiency of the pumping station drops sharply - up to 30-35%, but the noise level characteristic of built-in ejectors decreases.
The presented video materials will help you understand the design and principle of operation of self-priming equipment.
Clip # 1. Assembly of the pump from the Asterion company (UP series):
Clip # 2. The principle of operation of a centrifugal self-priming pump:
Clip # 3. Aquarium Overview (AJC Series):
Centrifugal and vortex self-priming pumps are the most suitable equipment for private use in suburban areas. With their help, you can create a water supply or irrigation system.
But remember that maximum efficiency can be achieved only by carefully analyzing the conditions of use of the pumping station and studying the technical characteristics of the selected model.
We are waiting for your stories about your personal experience in pumping water with a self-priming pump. Please leave comments in the box below. Here you can ask questions about interesting points and share useful facts.